SLS US Smart Switch with Motion Sensor

SLS US Smart Switch with Motion Sensor

Description

The product is a new saving-energy smart switch with motion sensor; it adopts a good sensitivity detector and an integrated circuit. It gathers automatism, convenience, safety, saving energy, and practical functions. It utilizes the infrared energy from humans as a control signal source. It can start the load at once when one enters the detection field. It can identify day and night automatically. It is easy to install and used widely.

The light will be on until the time delay occurs when the sensor is triggered. Once the constant signal is detected, the time will be overlaid, and the light will be on constantly. It can be installed in indoor, corridor, or public buildings.

Wiring

Features

Detection Field: Covers up, down, left, and right; sensitivity varies with movement orientation.
Day/Night Identification: Pre-set to operate in ambient light below 20 LUX.
Power and Detection Indication: Indicator flashes once every 4 seconds when powered on and twice every second upon signal reception.
Continual Time-Delay Addition: Resets and extends time-delay with each new detection signal.
Time-Delay Adjustment: Adjustable from 8±3 seconds to 7±2 minutes.
Switch Modes: “AUTO” when pushed in, “OFF” when pushed out.

Usage Scenario

Specifications

Product Name: smart switch with motion sensor

Product Standard: US standard
Product Dimensions: 120*70*42mm
Working Voltage:AC110V-240V
Working Frequency:50/60Hz
Rated Power:500W
Detection distance:9m max
Detection Range:180°
Detection Motion Speed:0.6~1.5m/s
Light-control:10ux~2000lux(adjustable)
Time Setting:Min:8sec±3sec; Max: 7min±2min (adjustable)
Installation Height:1m~1.6m
Power Consumption:0.45W
Working Humidity:<93%RH
Working Temperature:-20~40℃